How Do I Prepare for a Safety Certificate Inspection? 8 Tips to Help You Pass!

Firstly, yes! – You can increase your chances of passing if you prepare for a safety certificate inspection! This is due to the simple reason that many owners simply forget or overlook simple issues that can be easily fixed. If you’re preparing an upcoming safety certificate inspection in Queensland, here’s a quick guide that can help you to ensure your vehicle meets the basic safety standards:

1. Understand the Criteria:

It is ideal to familiarise yourself with the criteria of a safety certificate inspection and the specific safety standards that must be met. These safety standards are divided up into sections and include:

  • Seats and restraints
  • Lights and electrical components
  • Windscreen and glazing (windows)
  • Body, chassis and frame
  • Steering and suspension
  • Wheels and tyres
  • Brakes
  • Engine, driveline and emissions
  • Vehicle safety features
  • Modifications

You can view the inspection manual in full on the Department of Transport and Main Roads (TMR) website.

2. Check Vehicle Components:

Next, you can perform an examination of your car to verify that all components meet safety standards. Below, we’ve suggested several easy steps you can undertake:

  1. ▢ Check that your vehicle is free of grease, rust, and oil leaks.
  2. ▢ Make sure the registration pate, VIN/chassis number, and odometer are legible.
  3. ▢ Ensure the car seats and seat belts are free from damage and in working order.
  4. ▢ Check that the windscreen and windows are visibly clear and free from chips, cracks, and bubbles.
  5. ▢ Make sure the lamps are working for all lighting components; headlights, indicator signal lights, number plate lights, reversing and braking lights.
  6. ▢ Ensure the car battery is not leaking, cracked and secured.
  7. ▢ Check the tyres are no older than 5 years from the manufacturing date, and are free from damage; such as cracks and bulging.
  8. ▢ Make sure the rims are the correct size and width for the vehicle, are free from corrosion and rust, and show no cracks, bend, buckle, or damage.
  9. ▢ Ensure all wheel nuts, bolts, and studs are present, and check that mudguards have no damage.
  10. ▢ Check the exhaust for excessive noise, abnormal smoke or evidence of leaks.
  11. ▢ Make sure the windscreen wipers and washers are operational, and are not split, hardened, or bent.
  12. ▢ Ensure the accelerator control operates smoothly, changes gears easily, drives straight without jerking, returns to idle, and all brakes operate effectively.
  13. ▢ Check there are no fault lights or warning signals displayed on the dash in the cockpit.

3. Address Known Issues Beforehand:

If you identify any issues during your inspection, it is best to address them promptly. This may involve repairing or replacing faulty components to ensure your vehicle complies with safety standards. If you are unsure, you can reach out to your trusted mechanic or contact your nearest TMR office.

4. Clean Your Vehicle:

Presenting a clean and well-maintained vehicle can leave a positive impression during the inspection. In addition, when dirt builds up on a vehicle, it can erode the protective paint layer, leaving it exposed to rust. Either way, we highly recommend that you clean both the interior and exterior of your vehicle before the inspection.

5. Gather Required Documents:

You will want to prepare all necessary documents for the inspection, including your proof that the vehicle was previously registered, any relevant repair receipts as well as TMR written approval for any complex modifications.

6. Schedule an Inspection:

Now, you’re ready and can schedule your safety certificate inspection without a sweat! Contact an AIS Approved Examiner in Queensland, such as ASAP Roadworthys, to schedule your safety certificate inspection.

7. Be Present During the Inspection:

It is important to be present during the inspection, which should take no longer than 30 minutes. In addition, you will be able to address any questions the Approved Examiner may have, as well as to provide access to all areas of the vehicle.

8. Address Any Recommended Findings:

If the Approved Examiner identifies any issues during the inspection, take note of their recommendations and address them promptly. This may involve making additional repairs or adjustments to ensure compliance. Through ASAP Roadworthys, if the vehicle fails the safety inspection, you will have 14 days to rectify the problem.

Prepare to Receive a Safety Certificate!

If your vehicle passes the inspection, you will receive a safety certificate, formerly known as a roadworthy certificate. This certificate is valid for the specified period, which is usually 2,000 km or two months (whichever comes first). Keep this certificate in a safe place, as you may will need it if you plan on selling or registering the vehicle within the next couple months.

By following these steps and ensuring your vehicle meets the required safety standards, you can prepare for a safety certificate inspection in Queensland.

Book your safety certificate with ASAP Roadworthys through our simple online booking form.

Leave a Reply

Your email address will not be published. Required fields are marked *

Read More From ASAP Roadworthys

Trusted For Road Safety
Counter Section - ASAP Roadworthys 1
Happy Customers
Counter Section - ASAP Roadworthys 2
Years Experience
Counter Section - ASAP Roadworthys 3
5 Star Reviews
Counter Section - ASAP Roadworthys 4
Qualified Examiners

Proudly Working With

🇹🇷🇸🇾 Help For Turkey & Syria, affected by massive earthquakes.

🇹🇷🇸🇾 Help For Turkey & Syria